
At next few pages we would like to offer you several basic models of machinery for high speed stamping – presses. Punching lines are made for heavy duty non-stop work with minimum maintenance. Only occasional oiling and greasing of bearings and moving parts is all that is required for constant full capacity production. Machines are highly reliable and extremely low cost productivity. On machine you get one feeder which can be set to push or to pull, and it can be mounted on left or right side according your requirement. One feed is more than enough for punching steel strips thickness 0.60 mm and above. If you are going to use machine for punching soft materials or you need to stamp at very high speeds, than you will probably need twin feed to make sure that strip is always correctly added into tool. Another feed can be optionally added and synchronized into process. Many world band saw blades producers are using already in their productions.
Presses are capable for huge capacity production of any punched product which can be produced by metal stamping. Only tool is required to be changed and you have completely new product.
Fitted with one mechanical feeder.
Nominal capacity: 300 kN (30 tons)
Min./Max. number of strokes per minute: 100/600
Max width of strip: 190 mm
Variable stroke: 8-40 mm
Bolster plate dimensions: 540 x 300 mm
Fitted with two mechanical feeders.
Nominal capacity: 300 kN (30 tons)
Max. strip width: 190 mm
Min./Max. number of strokes per minute: 100/600
Table surface area: 540 x 300 mm
Fitted with one servo feeder.
Nominal capacity: 300 kN (30 tons)
Max. strip width: 220 mm
Min./Max. number of strokes per minute: 60/600
Table surface area: 540 x 300 mm
Fitted with two servo feeders.
Nominal capacity: 300 kN (30 tons)
Max. strip width: 220 mm
Min./Max. number of strokes per minute: 60/600
Table surface area: 540 x 300 mm
Fitted with one Servo feeder.
Nominal capacity: 180 kN (18 tons)
Max. strip width: 200 mm
Min./Max. number of strokes per minute: 100/600
Fitted with two Servo feeders.
Nominal capacity: 500 kN (50 tons).
Min./Max. number of strokes per minute: 60/300.
Max width of strip: 320 mm.
Variable stroke: 8-60 mm.
Bolster plate dimensions: 460 x 450 mm.
Fitted with one mechanical feeder.
Nominal capacity: 300 kN (30 tons)
Min./Max. number of strokes per minute: 100/600
Max width of strip: 190 mm
Variable stroke: 8-40 mm
Bolster plate dimensions: 540 x 300 mm
Fitted with two mechanical feeders.
Nominal capacity: 300 kN (30 tons)
Max. strip width: 190 mm
Min./Max. number of strokes per minute: 100/600
Table surface area: 540 x 300 mm
Fitted with one servo feeder.
Nominal capacity: 300 kN (30 tons)
Max. strip width: 220 mm
Min./Max. number of strokes per minute: 60/600
Table surface area: 540 x 300 mm
Fitted with two servo feeders.
Nominal capacity: 300 kN (30 tons)
Max. strip width: 220 mm
Min./Max. number of strokes per minute: 60/600
Table surface area: 540 x 300 mm
Fitted with one Servo feeder.
Nominal capacity: 180 kN (18 tons)
Max. strip width: 200 mm
Min./Max. number of strokes per minute: 100/600
Fitted with two Servo feeders.
Nominal capacity: 500 kN (50 tons).
Min./Max. number of strokes per minute: 60/300.
Max width of strip: 320 mm.
Variable stroke: 8-60 mm.
Bolster plate dimensions: 460 x 450 mm.