We offer for sale used / second-hand high speed presses Made by Bruderer, Schaal & Mabu. Brand BRUDERER which is sole registered trademark and ownership of company BRUDERER in Switzerland. We are not in any way connected with BRUDERER or any other company. Eventual reconditioning or eventual repairs on machines are done by us, Silicon +, not Bruderer. We are always looking to buy your surplus Bruderer presses. Used/Cosmetically reconditioned machines are subject to performance variations from new ones. Some of these used or cosmetically reconditioned machines, if it was required, were processed via one or more of the following steps: stripping, painting, reassembling and fine tuning if necessary in our workshop. This product has NOT been endorsed or approved by the original manufacturer and those presses DO NOT fall under the original manufacturer’s warranty or certification. If any modification or repair is done, this will be clearly stated with every press supplied by Silicon Plus.
Please offer us what ever you have from Bruderer.
At the following page you can find our current offer.
Producer: Baust Werkzeugtechnik
Sheet processor drive power 4.6 [kW].
Material thickness range: 0.4 – 1.5 [mm]. Width max. 200 mm.
Material Yield strenght: 350 [N/pmm]. Speed up to 80 m/min.
Power: 3 x 400 [V] 5%.
BIHLER GRM100 multislide punching and forming machine,
Machine re-engineered in year 2010 originally by Bihler, updated with servo motor, pump, rewired, new control, etc.
Equipped with 4x forming slides and 18 [ton] press station.
Gripper feed on right-hand side with straightener.
Max operating speed 135 strokes per minute.
Bruderer BSTA 50 Ton (BSTA 60 II) high speed punching press.
Nominal capacity: 500 [kN] (50 [ton]).
Min./Max. number of strokes: 100/1200.
Year of manufacture: 1983.
Max. width of strip: 200 [mm].
Variable stroke: 16 to 51 [mm].
Schaal SEP 40 automatic punching press.
Nominal capacity: 400 [kN] (40 [tons]).
Fitted with gripper feeding device SZV 202.
Min./Max. strokes per minute: 100/500.
Year of manufacture: 1992.
Max width of strip: 160 [mm].
Variable stroke: 8 to 70 [mm].
Bruderer BSTA 25 precision high speed press.
Nominal capacity: 250 [kN] (25 [tons]).
Fitted with two BBV 202/120 roll feeders.
Min./Max. number of strokes per minute: 100/1500.
Year of manufacture: 1984.
Max width of strip: 203 [mm].
Variable stroke: 13 to 38 [mm].
Bruderer BSTA 25 precision high speed press.
Nominal capacity: 250 [kN] (25 [tons]).
Fitted with two BBV 202/120 roll feeders.
Min./Max. number of strokes per minute: 100/1500.
Year of manufacture: 1985.
Max width of strip: 203 [mm].
Variable stroke: 13 to 38 [mm].
Make: MABU.
Model: 25 VPR / ZPL 11.
Max. Pressure: 250 [kN] (25 [T])
Speed range: 50-250 [spm].
Adjustable stroke: 7-62 [mm].
Fitted with BBV202 mechanical feeder.
Nominal capacity: 300 [kN].
Strokes per minute (Min/Max): 100/600.
Adjustable stroke: 8-40 [mm].
Max. strip width: 200 [mm].
Table area: 540 x 300 [mm].
Bruderer BSTA 200M precision high speed press.
Nominal capacity: 200 [kN] (20 [tons]).
Fitted with two BBV 195/85 roll feeder.
Min./Max. number of strokes per minute: 100/1800.
Year of manufacture: 2001.
Max width of strip: 160 [mm].
Variable stroke: 8 to 51 [mm].
Sound insulating cabins.
For Bruderer high speed automatic presses.
On stock available cabins for machines:
BSTA 25, BSTA 41, BSTA 50
Bihler B-4/2
Welding Control System.
Connection: 400 V 50 Hz.
Equipped with welding component ET50.6 .
Year of manufacture: 1988/04.
Made in Germany.
Bihler B-4/2
Welding Control System.
Connection: 400 V 50 Hz.
Equipped with welding component ET50.6 .
Year of manufacture: 1988/04.
Made in Germany.
Bruderer BSTA 110H precision high speed punching press.
Nominal capacity: 1100 [kN] (110 [ton[).
Min./Max. number of strokes: 100/800.
Year of manufacture: 1976.
Max. width of strip: 400 [mm].
Variable stroke: 16 to 75 [mm].
Bruderer BSTA 160U precision high speed punching press.
Nominal capacity: 1600 kN (160 ton).
Max. number of strokes: 825 spm.
Reengineered in: 2009.
Year of manufacture: 1998.
Table length: 1200 mm.
Variable stroke: 19 to 75 mm.
Bruderer BSTA 50 precision high speed press.
Nominal capacity: 500 [kN] (50 [tons]).
Strokes per minute (Min/Max): 100/1200.
Year of manufacture: 1984/2022.
Max width of strip: 203 [mm].
Variable stroke: 16 to 51 [mm].
Bruderer BSTA 50 precision high speed punching press.
Nominal capacity: 500 kN (50 ton).
Min./Max. number of strokes: 100/1200.
Year of manufacture: 1985.
Max. width of strip: 200 mm.
Variable stroke: 16 to 51 mm.
Bruderer BSTA 50 high speed punching press.
Nominal capacity: 500 kN (50 ton).
Year of manufacture: 1979.
Max. width of strip: 200 mm.
Variable stroke: 16 to 51 mm.
Bruderer BSTA 50 HL precision high speed punching press.
Nominal capacity: 500 kN (50 ton).
Year of manufacture: 1988.
Max. width of strip: 200 mm.
Variable stroke: 16 to 51 mm.
Table length: 950 mm.
Bruderer BSTA 50 precision high speed punching press.
Nominal capacity: 500 kN (50 ton).
Min./Max. number of strokes: 100/1200.
Year of manufacture: 1985.
Max. width of strip: 200 mm.
Variable stroke: 16 to 51 mm.
Bruderer BSTA 50 precision high speed punching press.
Nominal capacity: 500 kN (50 ton).
Min./Max. number of strokes: 100/1200.
Year of manufacture: 1985.
Max. width of strip: 200 mm.
Variable stroke: 16 to 51 mm.
Bruderer BSTA 50VL precision high speed punching press.
Nominal capacity: 500 kN (50 ton).
Min./Max. number of strokes: 100/1120.
Year of manufacture: 1993.
Max. width of strip: 200 mm.
Variable stroke: 16 to 51 mm.
Bruderer BSTA 41 precision high speed press.
Nominal capacity: 400 kN (40 tons).
Fitted with two BBV 202/120 roll feeders.
Min./Max. number of strokes per minute: 100/1200.
Year of manufacture: 1985.
Max width of strip: 190 mm.
Variable stroke: 13 to 57 mm.
Bruderer BSTA 300 precision high speed press.
Nominal capacity: 300 kN (30 tons)
Min./Max. number of strokes per minute: 100/1800
Year of manufacture: 2001
Max width of strip: 160 mm
Fixed stroke: 15.9 mm
Bruderer BSTA 25 precision high speed punching press.
Nominal capacity: 250 kN (25 ton).
Min./Max. number of strokes: 100/1500.
Max width of strip: 202 mm.
Variable stroke: 13 to 38 mm.
Table 540 x 530 mm
Bruderer BSTA 25 precision high speed press.
Nominal capacity: 250 kN (25 tons).
Fitted with two BBV 202/120 roll feeders.
Min./Max. number of strokes per minute: 100/1500.
Year of manufacture: 1985.
Max width of strip: 203 mm.
Variable stroke: 13 to 38 mm.
Bruderer BSTA 25 precision high speed press.
Nominal capacity: 250 [kN] (25 [tons]).
Fitted with two BBV 202/120 roll feeders.
Min./Max. number of strokes per minute: 100/1500.
Year of manufacture: 1984.
Max width of strip: 203 [mm].
Variable stroke: 13 to 38 [mm].
Bruderer BSTA 25 precision high speed punching press.
Nominal capacity: 250 kN (25 ton)
Min./Max. number of strokes: 100/1500
Max width of strip: 202 mm
Variable stroke: 13 to 38 mm
High speed press 25t (250kN)
Low noise machine with high frequency inverter speed control.
Siemens touch screen 19“
Bruderer BSTA 20 precision high speed punching press.
Nominal capacity: 200 kN (20 ton)
Min./Max. number of strokes: 100/1800
Year of manufacture: 1984
Feeding pitch: 85 mm
Variable stroke: 8 to 40 mm
Bruderer BSTA 20 E precision punch high speed punching press.
Nominal capacity: 200 kN (20 ton).
Min./Max. number of strokes: 100/1800.
Year of manufacture: 1987.
Max. width of strip: 160 mm.
Hours of operation: 33000 h.
Bruderer BSTA 20 E precision punch high speed punching press.
Nominal capacity: 200 kN (20 ton).
Min./Max. number of strokes: 100/1800.
Year of manufacture: 1985.
Max. width of strip: 160 mm.
Adjustable stroke: 8; 9.5; 13; 17; 21; 25; 32; 38.
Bruderer BSTA 20 E precision punch high speed punching press.
Nominal capacity: 200 kN (20 ton).
Min./Max. number of strokes: 100/1800.
Year of manufacture: 1985.
Max. width of strip: 160 mm.
Adjustable stroke: 8; 9.5; 13; 17; 21; 25; 32; 38.
Bruderer BSTA 180U precision high speed punching press.
Nominal capacity: 180 kN (18 ton)
Min./Max. number of strokes: 100/1400
Year of manufacture: 2001
Max width of strip: 160 mm
Variable stroke: 8 to 40 mm
Bruderer BSTA 10 MINI.
Precision high speed punching press.
Nominal capacity: 100 kn (10 t).
Min./Max. number of strokes: 100/500.
Variable stroke: 7, 13, 19, 25, 32, 38 mm.
Fitted with BBV roll feeder.
Max width of strip: 30 mm.
SOLD OUT Bruderer BSTA 10 MINI.
Precision high speed punching press.
Nominal capacity: 100 [kN] (10 [t]).
Min./Max. number of strokes: 100/500.
Variable stroke: 7, 13, 19, 25, 32, 38 [mm].
Bruderer BSTA 10L MINI high speed punching press.
Nominal capacity: 100 kN (10 ton)
Min./Max. number of strokes: 100/500
Year of manufacture: 1999
Schaal SEP 40 automatic punching press.
Nominal capacity: 400 kN (40 tons).
Fitted with gripper feeding device SZV 202.
Min./Max. strokes per minute: 60/300.
Year of manufacture: 1992.
Max width of strip: 160 mm.
Variable stroke: 8 to 70 mm.
Schaal Automatic Punching Press.
Type SEP 25.
Max. Pressure: 250 [kN] (25 [T]).
Speed range: 60 – 300 [spm].
Year of manufacute: 1997.
Adjustable stroke: 8 – 60 [mm].
Make: MABU.
Model: VP 500 L / RC 11.
Max. Pressure: 500 kN (50 T)
Speed range: 60-300 spm.
Year of production: 2007.
Working hours: 5949 h (23. May. 2.022).
Adjustable stroke: 7-60.
Mabu HSS 32 high speed press.
Nominal capacity: 320 [kN] (32 [tons]).
Fitted with Mabu Rc11 feeder.
Min./Max. number of SPM: 100/1000.
Year of manufacture: 1987/97.
Mabu VP 250L Automatic press.
Nominal capacity: 250 [kN] (25 [tons]).
Fitted with servo roll feeder Mabu WE32 .
Min./Max. number of strokes per minute: 80/500.
Year of manufacture: 2006.
Max width of strip: 300 [mm].
Variable stroke: 7 to 62 [mm].
Make: MABU.
Model: 25 VPR / RC 11.
Max. Pressure: 250 kN (25 T)
Speed range: 80-600 [spm].
Year of production: 1995.
Adjustable stroke: 7-62 [mm].
BHP Dudley Servo feeder.
Model: SP 406 / 1.6 RF.
Capacity: 406W X 1.6 T.
Supply: 415V 3PH 50 Hz.
Max. feeding width: 400 mm.
Producer: Baust Werkzeugtechnik
Sheet processor drive power 4.6 [kW].
Material thickness range: 0.4 – 1.5 [mm]. Width max. 200 mm.
Material Yield strenght: 350 [N/pmm]. Speed up to 80 m/min.
Power: 3 x 400 [V] 5%.
BIHLER GRM100 multislide punching and forming machine,
Machine re-engineered in year 2010 originally by Bihler, updated with servo motor, pump, rewired, new control, etc.
Equipped with 4x forming slides and 18 [ton] press station.
Gripper feed on right-hand side with straightener.
Max operating speed 135 strokes per minute.
Bruderer BSTA 50 Ton (BSTA 60 II) high speed punching press.
Nominal capacity: 500 [kN] (50 [ton]).
Min./Max. number of strokes: 100/1200.
Year of manufacture: 1983.
Max. width of strip: 200 [mm].
Variable stroke: 16 to 51 [mm].
Schaal SEP 40 automatic punching press.
Nominal capacity: 400 [kN] (40 [tons]).
Fitted with gripper feeding device SZV 202.
Min./Max. strokes per minute: 100/500.
Year of manufacture: 1992.
Max width of strip: 160 [mm].
Variable stroke: 8 to 70 [mm].
Bruderer BSTA 25 precision high speed press.
Nominal capacity: 250 [kN] (25 [tons]).
Fitted with two BBV 202/120 roll feeders.
Min./Max. number of strokes per minute: 100/1500.
Year of manufacture: 1984.
Max width of strip: 203 [mm].
Variable stroke: 13 to 38 [mm].
Bruderer BSTA 25 precision high speed press.
Nominal capacity: 250 [kN] (25 [tons]).
Fitted with two BBV 202/120 roll feeders.
Min./Max. number of strokes per minute: 100/1500.
Year of manufacture: 1985.
Max width of strip: 203 [mm].
Variable stroke: 13 to 38 [mm].
Make: MABU.
Model: 25 VPR / ZPL 11.
Max. Pressure: 250 [kN] (25 [T])
Speed range: 50-250 [spm].
Adjustable stroke: 7-62 [mm].
Fitted with BBV202 mechanical feeder.
Nominal capacity: 300 [kN].
Strokes per minute (Min/Max): 100/600.
Adjustable stroke: 8-40 [mm].
Max. strip width: 200 [mm].
Table area: 540 x 300 [mm].
Bruderer BSTA 200M precision high speed press.
Nominal capacity: 200 [kN] (20 [tons]).
Fitted with two BBV 195/85 roll feeder.
Min./Max. number of strokes per minute: 100/1800.
Year of manufacture: 2001.
Max width of strip: 160 [mm].
Variable stroke: 8 to 51 [mm].
Sound insulating cabins.
For Bruderer high speed automatic presses.
On stock available cabins for machines:
BSTA 25, BSTA 41, BSTA 50
Bihler B-4/2
Welding Control System.
Connection: 400 V 50 Hz.
Equipped with welding component ET50.6 .
Year of manufacture: 1988/04.
Made in Germany.
Bihler B-4/2
Welding Control System.
Connection: 400 V 50 Hz.
Equipped with welding component ET50.6 .
Year of manufacture: 1988/04.
Made in Germany.
Bruderer BSTA 110H precision high speed punching press.
Nominal capacity: 1100 [kN] (110 [ton[).
Min./Max. number of strokes: 100/800.
Year of manufacture: 1976.
Max. width of strip: 400 [mm].
Variable stroke: 16 to 75 [mm].
Bruderer BSTA 160U precision high speed punching press.
Nominal capacity: 1600 kN (160 ton).
Max. number of strokes: 825 spm.
Reengineered in: 2009.
Year of manufacture: 1998.
Table length: 1200 mm.
Variable stroke: 19 to 75 mm.
Bruderer BSTA 50 precision high speed press.
Nominal capacity: 500 [kN] (50 [tons]).
Strokes per minute (Min/Max): 100/1200.
Year of manufacture: 1984/2022.
Max width of strip: 203 [mm].
Variable stroke: 16 to 51 [mm].
Bruderer BSTA 50 precision high speed punching press.
Nominal capacity: 500 kN (50 ton).
Min./Max. number of strokes: 100/1200.
Year of manufacture: 1985.
Max. width of strip: 200 mm.
Variable stroke: 16 to 51 mm.
Bruderer BSTA 50 high speed punching press.
Nominal capacity: 500 kN (50 ton).
Year of manufacture: 1979.
Max. width of strip: 200 mm.
Variable stroke: 16 to 51 mm.
Bruderer BSTA 50 HL precision high speed punching press.
Nominal capacity: 500 kN (50 ton).
Year of manufacture: 1988.
Max. width of strip: 200 mm.
Variable stroke: 16 to 51 mm.
Table length: 950 mm.
Bruderer BSTA 50 precision high speed punching press.
Nominal capacity: 500 kN (50 ton).
Min./Max. number of strokes: 100/1200.
Year of manufacture: 1985.
Max. width of strip: 200 mm.
Variable stroke: 16 to 51 mm.
Bruderer BSTA 50 precision high speed punching press.
Nominal capacity: 500 kN (50 ton).
Min./Max. number of strokes: 100/1200.
Year of manufacture: 1985.
Max. width of strip: 200 mm.
Variable stroke: 16 to 51 mm.
Bruderer BSTA 50VL precision high speed punching press.
Nominal capacity: 500 kN (50 ton).
Min./Max. number of strokes: 100/1120.
Year of manufacture: 1993.
Max. width of strip: 200 mm.
Variable stroke: 16 to 51 mm.
Bruderer BSTA 41 precision high speed press.
Nominal capacity: 400 kN (40 tons).
Fitted with two BBV 202/120 roll feeders.
Min./Max. number of strokes per minute: 100/1200.
Year of manufacture: 1985.
Max width of strip: 190 mm.
Variable stroke: 13 to 57 mm.
Bruderer BSTA 300 precision high speed press.
Nominal capacity: 300 kN (30 tons)
Min./Max. number of strokes per minute: 100/1800
Year of manufacture: 2001
Max width of strip: 160 mm
Fixed stroke: 15.9 mm
Bruderer BSTA 25 precision high speed punching press.
Nominal capacity: 250 kN (25 ton).
Min./Max. number of strokes: 100/1500.
Max width of strip: 202 mm.
Variable stroke: 13 to 38 mm.
Table 540 x 530 mm
Bruderer BSTA 25 precision high speed press.
Nominal capacity: 250 kN (25 tons).
Fitted with two BBV 202/120 roll feeders.
Min./Max. number of strokes per minute: 100/1500.
Year of manufacture: 1985.
Max width of strip: 203 mm.
Variable stroke: 13 to 38 mm.
Bruderer BSTA 25 precision high speed press.
Nominal capacity: 250 [kN] (25 [tons]).
Fitted with two BBV 202/120 roll feeders.
Min./Max. number of strokes per minute: 100/1500.
Year of manufacture: 1984.
Max width of strip: 203 [mm].
Variable stroke: 13 to 38 [mm].
Bruderer BSTA 25 precision high speed punching press.
Nominal capacity: 250 kN (25 ton)
Min./Max. number of strokes: 100/1500
Max width of strip: 202 mm
Variable stroke: 13 to 38 mm
High speed press 25t (250kN)
Low noise machine with high frequency inverter speed control.
Siemens touch screen 19“
Bruderer BSTA 20 precision high speed punching press.
Nominal capacity: 200 kN (20 ton)
Min./Max. number of strokes: 100/1800
Year of manufacture: 1984
Feeding pitch: 85 mm
Variable stroke: 8 to 40 mm
Bruderer BSTA 20 E precision punch high speed punching press.
Nominal capacity: 200 kN (20 ton).
Min./Max. number of strokes: 100/1800.
Year of manufacture: 1987.
Max. width of strip: 160 mm.
Hours of operation: 33000 h.
Bruderer BSTA 20 E precision punch high speed punching press.
Nominal capacity: 200 kN (20 ton).
Min./Max. number of strokes: 100/1800.
Year of manufacture: 1985.
Max. width of strip: 160 mm.
Adjustable stroke: 8; 9.5; 13; 17; 21; 25; 32; 38.
Bruderer BSTA 20 E precision punch high speed punching press.
Nominal capacity: 200 kN (20 ton).
Min./Max. number of strokes: 100/1800.
Year of manufacture: 1985.
Max. width of strip: 160 mm.
Adjustable stroke: 8; 9.5; 13; 17; 21; 25; 32; 38.
Bruderer BSTA 180U precision high speed punching press.
Nominal capacity: 180 kN (18 ton)
Min./Max. number of strokes: 100/1400
Year of manufacture: 2001
Max width of strip: 160 mm
Variable stroke: 8 to 40 mm
Bruderer BSTA 10 MINI.
Precision high speed punching press.
Nominal capacity: 100 kn (10 t).
Min./Max. number of strokes: 100/500.
Variable stroke: 7, 13, 19, 25, 32, 38 mm.
Fitted with BBV roll feeder.
Max width of strip: 30 mm.
SOLD OUT Bruderer BSTA 10 MINI.
Precision high speed punching press.
Nominal capacity: 100 [kN] (10 [t]).
Min./Max. number of strokes: 100/500.
Variable stroke: 7, 13, 19, 25, 32, 38 [mm].
Bruderer BSTA 10L MINI high speed punching press.
Nominal capacity: 100 kN (10 ton)
Min./Max. number of strokes: 100/500
Year of manufacture: 1999
Schaal SEP 40 automatic punching press.
Nominal capacity: 400 kN (40 tons).
Fitted with gripper feeding device SZV 202.
Min./Max. strokes per minute: 60/300.
Year of manufacture: 1992.
Max width of strip: 160 mm.
Variable stroke: 8 to 70 mm.
Schaal Automatic Punching Press.
Type SEP 25.
Max. Pressure: 250 [kN] (25 [T]).
Speed range: 60 – 300 [spm].
Year of manufacute: 1997.
Adjustable stroke: 8 – 60 [mm].
Make: MABU.
Model: VP 500 L / RC 11.
Max. Pressure: 500 kN (50 T)
Speed range: 60-300 spm.
Year of production: 2007.
Working hours: 5949 h (23. May. 2.022).
Adjustable stroke: 7-60.
Mabu HSS 32 high speed press.
Nominal capacity: 320 [kN] (32 [tons]).
Fitted with Mabu Rc11 feeder.
Min./Max. number of SPM: 100/1000.
Year of manufacture: 1987/97.
Mabu VP 250L Automatic press.
Nominal capacity: 250 [kN] (25 [tons]).
Fitted with servo roll feeder Mabu WE32 .
Min./Max. number of strokes per minute: 80/500.
Year of manufacture: 2006.
Max width of strip: 300 [mm].
Variable stroke: 7 to 62 [mm].
Make: MABU.
Model: 25 VPR / RC 11.
Max. Pressure: 250 kN (25 T)
Speed range: 80-600 [spm].
Year of production: 1995.
Adjustable stroke: 7-62 [mm].
BHP Dudley Servo feeder.
Model: SP 406 / 1.6 RF.
Capacity: 406W X 1.6 T.
Supply: 415V 3PH 50 Hz.
Max. feeding width: 400 mm.