Menu
Bruderer BSTA 200M precision high speed press.
Nominal capacity: 200 kN (20 tons).
Fitted with two BBV 101/75 roll feeder.
Min./Max. number of strokes per minute: 100/1800.
Year of manufacture: 1996. Hours under power: 51574.
Max width of strip: 125 mm.
Variable stroke: 8 to 51 mm.
Year of manufacture: 2012.
Loading capacity maximum: 30 x 2 kg.
Outside diameter of bobbin maximum: 800 mm.
Inside diameter of bobbin: 360 mm.
Bobbin width: 45 mm.
Speed decoiler: 0.3 – 4 rpm.
Okamoto ACC106CA1 Precision Surface Grinding Machine
Mint condition
Machine Specifications:
Maximum Table Travel: 1200 x 652 mm
Grinding Wheel Size: Ø 405 x 50 x Ø 127 mm
Grinding Wheel Speed: 500 to 2500 min⁻¹
At next few pages we would like to offer you several basic models of machinery for high speed stamping – presses. Punching lines are made for heavy duty non-stop work with minimum maintenance. Only occasional oiling and greasing of bearings and moving parts is all that is required for constant big capacity production. Machines are highly reliable and extremely low cost productivity. On machine you get one feeder which can be set to push or to pull, and it can be mounted on left or right side according your requirement. One feed is more than enough for punching steel strips thickness 0.60 mm and above. If you are going to use machine for punching soft materials or you need to stamp at very high speeds, than you will probably need twin feed to make sure that strip is always correctly added into tool. Another feed can be optionally added and synchronized into process. Many major world band saw blades producers are using already in their productions.
Presses are capable for huge capacity production of any punched product which can be produced by metal stamping. Only tool is required to be changed and you have completely new product.
Coiler max. load capacity 1 ton
Strip width up to 300 mm
Inner diameter min 250 mm max. 500 mm
Outer diameter max. 1300 mm
Loop control by dancing bar or hall sensor
Power 0.75 KW
Fitted with mechanical feeder.
Nominal capacity: 300 [kN].
Strokes per minute (Min/Max): 100/600.
Adjustable stroke: 8-40 [mm].
Max. strip width: 150 [mm].
Table area: 540 x 300 [mm].
Warranty: 1 year.
Twin mechanical feeding.
Nominal capacity: 300 [kN].
Strokes per minute (Min/Max): 100/600.
Adjustable stroke: 8-40 [mm].
Max. strip width: 150 [mm].
Table area: 540 x 300 [mm].
Warranty: 1 year.
Fitted with two servo feeders.
Nominal capacity: 300 [kN].
Strokes per minute (Min/Max): 100/600.
Adjustable stroke: 8-40 [mm].
Max. strip width: 300 [mm].
Table area: 540 x 300 [mm].
Warranty: 1 year.
Fitted with SFS 300 servo feeder.
Nominal capacity: 300 [kN].
Strokes per minute (Min/Max): 100/600.
Adjustable stroke: 8-40 [mm].
Max. strip width: 300 [mm].
Table area: 540 x 300 [mm].
Warranty: 1 year.
Fitted with mechanical feeder.
Nominal capacity: 180 [kN].
Strokes per minute (Min/Max): 100/600.
Adjustable stroke: 4-36 [mm].
Max. strip width: 100 [mm].
Table area: 350 x 310 [mm].
Warranty: 1 year.
Fitted with one Servo feeder.
Nominal capacity: 180 kN (18 tons)
Max. strip width: 200 mm
Min./Max. number of strokes per minute: 100/600
Synchronized easily with punching machine and existing feeder, Powered with main machine eccentric shaft through first feeder , Run both directions, forward and reverse…
Fitted with two or one Servo feeders.
Nominal capacity: 500 kN (50 tons).
Min./Max. number of strokes per minute: 60/300.
Max width of strip: 220 mm or 320 mm. SFS 200 or SFS 300 servo feeders.
Variable stroke: 8-60 mm.
Bolster plate dimensions: 460 x 450 mm.
This strip feed unit has been designed to function without parts that are subject to wear, such as brakes and free-wheeling mechanisms. Thus harmful heat generation can be avoided and the unit can operate almost maintenance-free. Thanks to a reduction in the mass forces, the rigid construction, accurate vibration calculations and the input of experience in design and production, the unit has an exceptional feed performance with optimal step accuracy.
Long life time, 50-60.000 punches between resharpening, Made of OCR Tool Steel, Vacuum hardend up to 62 HRC…
Coiler max. load capacity 1 ton
Strip width up to 300 mm
Inner diameter min 250 mm max. 500 mm
Outer diameter max. 1300 mm
Loop control by dancing bar or hall sensor
Power 0.75 KW
Fitted with mechanical feeder.
Nominal capacity: 300 [kN].
Strokes per minute (Min/Max): 100/600.
Adjustable stroke: 8-40 [mm].
Max. strip width: 150 [mm].
Table area: 540 x 300 [mm].
Warranty: 1 year.
Twin mechanical feeding.
Nominal capacity: 300 [kN].
Strokes per minute (Min/Max): 100/600.
Adjustable stroke: 8-40 [mm].
Max. strip width: 150 [mm].
Table area: 540 x 300 [mm].
Warranty: 1 year.
Fitted with two servo feeders.
Nominal capacity: 300 [kN].
Strokes per minute (Min/Max): 100/600.
Adjustable stroke: 8-40 [mm].
Max. strip width: 300 [mm].
Table area: 540 x 300 [mm].
Warranty: 1 year.
Fitted with SFS 300 servo feeder.
Nominal capacity: 300 [kN].
Strokes per minute (Min/Max): 100/600.
Adjustable stroke: 8-40 [mm].
Max. strip width: 300 [mm].
Table area: 540 x 300 [mm].
Warranty: 1 year.
Fitted with mechanical feeder.
Nominal capacity: 180 [kN].
Strokes per minute (Min/Max): 100/600.
Adjustable stroke: 4-36 [mm].
Max. strip width: 100 [mm].
Table area: 350 x 310 [mm].
Warranty: 1 year.
Fitted with one Servo feeder.
Nominal capacity: 180 kN (18 tons)
Max. strip width: 200 mm
Min./Max. number of strokes per minute: 100/600
Synchronized easily with punching machine and existing feeder, Powered with main machine eccentric shaft through first feeder , Run both directions, forward and reverse…
Fitted with two or one Servo feeders.
Nominal capacity: 500 kN (50 tons).
Min./Max. number of strokes per minute: 60/300.
Max width of strip: 220 mm or 320 mm. SFS 200 or SFS 300 servo feeders.
Variable stroke: 8-60 mm.
Bolster plate dimensions: 460 x 450 mm.
This strip feed unit has been designed to function without parts that are subject to wear, such as brakes and free-wheeling mechanisms. Thus harmful heat generation can be avoided and the unit can operate almost maintenance-free. Thanks to a reduction in the mass forces, the rigid construction, accurate vibration calculations and the input of experience in design and production, the unit has an exceptional feed performance with optimal step accuracy.
Long life time, 50-60.000 punches between resharpening, Made of OCR Tool Steel, Vacuum hardend up to 62 HRC…
